Billet Release Bearing Support


Availability: In Stock


Billet Release Bearing Support

It’s no secret that the latest generation of slave cylinders GM has been putting in their performance cars have drawbacks. While the newer slave cylinders did much to alleviate some issues the older units had they actually have a much more severe issue to deal with.

Many of the aftermarket companies are blaming the entire bearing assembly for failure. Upon research, we’ve discovered that the bearing itself isn’t the issue it’s the plastic piece upon which the bearing rides. This piece, when hot enough, disintegrates and causes some pretty catastrophic failures. This not only kills the slave cylinder, it also almost simultaneously kills the clutch in the process.


Fits - 5th/6th Gen Camaro, C6/C7 Corvette, 1st/2nd Gen CTS-V, SSR, SS Sedan, and G8 GXP


⚠ WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to  

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: